Indeterminant Tomato Bejbino F1

• Connect the Multipot to power network. If everything works correctly the red light should be lit and the heating plate under the bottom of the pan begins to slowly warm up to operating temperature. After reaching the optimum temperature is the temperature of the hot plate and no longer increases the temperature.
• After several hours, the substrate is warmed to about 28 ° C depending on ambient temperature (15-20 ° C) room.
•    Leave seedling switched network at its sole discretion fail to water the seeds of plants. Whether you are watering directly into the cup and you pour water into the lower bowl - it is up to you which option you choose. Both are possible and not contrary to the proper use of seedling. Humidity can be controlled by openly lid.
• Recognizing that the plants have grown sufficiently and the seedling is no need to unplug to disconnect it from network, check light case to shine.
• Remove the seedling pots, the machine properly clean and dry (see paragraph cleaning). Power cord reel to twist from the bottom of the Multipot and clear away.